G. Wine Sales, Inc.

S A W S

Resaws	Cut-To-Length	Gang Saws

Scragg Mills	Sawmill Equip.	Misc. Saws

R E S A W S

1473 1989Baker BBR-O Bandsaw
2 head; 440 volt; 20hp; 13'2" band blades; with return; fair condiiton

1483 2003 Brewco 1600 Grade Run Around System
440 volt; right hand; Model B1600; 40 hp on saw; 40 hp for hydraulic unit; 5 way separator.

1366 1994 Brewer 6 Head Resaw
20 hp motors; hydraulic pac and spacers

1111 1985 Cornell Double Arbor 8" CLB-B
includes motors and spacers; 2 motors that are 40 hp

1247 1983 Cornell Center Cut Double Arbor Resaw
240 volt; 40 hp; up to 3 blades

1474 Cornell 500B Resaw
double arbor; approx. 1980; 1/8" kerf blades; includes Cornell 300 trim saw and unscrambler; in storage; good condition

1423 2001 HMC Pinheiro 55" Band Resaw
heavy duty welded steel construction of the cloumn and base; 7-1/4" wide cast wheels for 7" or 8" blades; pressure guides; hydraulic blade tensioning system; electically powered top saw guide; automatic lubrication system for wheels and blades; pneumatically operated braking system; 100hp TEFC motor; starter and v-belt drive; 20' infeed rollcase; 20' transfer to green chain; 16'6" transfer to return rollcase; 20' cant return rollcase; cant metal detector; cant return transfer

1387 2003 Morgan Resaw
SOLD

1479 1994 Morgan Resaw
SOLD

1391 1997 Morgan Resaw
575 volt; 30hp; 8" wide cut; 13' 2" band blades; new bearings

1489 1979 Producto Resaw & System
Model 76; 50hp; 230/460 volt; 3 phase; 15hp hydraulic motor; 6"x20' infeed conveyor; 10"x30' outfeed conveyor; 52"x33' 3 strand #78 chain transfer conveyor

1268 Turner Bandsaw
42" machine; infeed and outfeed included; 25 hp

1485 1994 Quality Machine Bandsaw
single head; 230/480 volt; 15hp; no mechanical problems; belt & tire feed speed are easily adjustable; easy to operate; good condition

1488 Unitronex Verticle Band Resaw System
Model DRPA 100; older model - year unknown; 25hp; 230/460 volt; 3 phase; 3.5"x39.5" wheels; 8"x13-1/2" infeed conveyor; 8"x66" outfeed conveyor; 32"x25' transfer sorting belt conveyor; infeed is variable electric with frequency converter; manual strain; up to 4-1/2' bands

C U T - T O - L E N G T H

1463 1994 Baker 6 Head Chop Saw
480 volt; 20 hp; 24"-60" length; 4"-12" diameter; comes with waste belt; unscrambler and infeed deck; in operation; some spare parts

897 Bar Mullin Optimizing Saw

1328 2003 Cornell 5 Head Trim Saw
   SOLD

1480 1996 Flacon 5 Head Trim Saw
40 volt; 15hp per motor; the 5th head needs a motor because it was never run; 16' capacity; with package deck and unscrambler; good condition; in operation

1413 Hartland Fab. & Machine Cut Off Saw
   SOLD

1412 Kent Block Cutter
   SOLD

1362 1994 L-M Verticut Rollcase Package Cut Off System
operator platform; 32' infeed rollcase; 10' outfeed rollcase; options and spares; digital readout; laser saw line guide light

1390 1990 L-M Verticut Cut-Off Saw
440 volt; 3 phase; 10hp; 6' blades

1481 Morgan Chop Saw
480 volt; 10hp; capacity: 8' infeed, 5' outfeed; in operation; good condition

1389 2005 Smetco Cut-Off Saw
220 volt; 5hp; 10" blades

1449 ST-5 Trim Boss Trim Saw
480 volt; 5 hp arbor and 3/4 hp drive; 28" to 54"

1363 2006 Pendu Double End Trimmer
480 volt; 2 7.5hp motors; 12" - 48" length capacity; infeed and outfeed; used approx. 10 hours; in excellent condition; this saw is currently set up to cut at a 45 degree angle but if you prefer the owner will send it back to Pendu to be reset at no additional charge

1338 Ultimizer Woodeye Scanner & Cutting System
20' infeed; 75' outfeed with; (2) Panasonic video monitors

1367 Whirlwind Chop Saw
212 right hand

Photos Not Available

G A N G S A W S

1456 2005 Brewer Gang Saw Cut Up Line
Brewer Golden Eagle Cut Off Saw: 30hp; cuts up to 7-1/4" x 12" cants; 16' infeed rollcase; 16' outfeed rollcase includes sweep device 8' & 16' scrap conveyor under cutoff saw; 6' infeed deck; unscrambler; motors & controls; 48' transfer deck with 12' of rollcase; Golden Eagle 2000 horizontal bandsaw: 20hp; hpu used 1" to 2" bandsaw; will cut up to 12"x12" timbers; includes 41 1-1/2" bandsaw blades; belt conveyor with seperator and deflector outfeed; cant run-around system: (2) 12' rollcase with sweep to 6' crossover deck; (1) 9' belt; (1) 21' blet; tire feeder on 8' infeed rollcase; rebuilt Brewer BR-8124 double arbor gang saw with 2 15/16" arbors; hpu includes various amounts of spacers and more; (2) 12' powered outfeed rollcase; 18' 4 strand deck with 14' 3 strand extension deck; Brewer Stacking Box with various lumber cart
Click here for more photos

1267 Brewer Double Arbor Gang Saw
SOLD

1455 2006 Corely Double Arbor Gang Saw
top & bottom arbors are 150hp; 70 saw blades; 4/4 spacers; used only one year; in operation; excellent condition

1278 1983 Cornell Gang Saw System
with sizer; 480 volt; 32" max/min length; 100hp on motor #1 and 125hp on motor #2; spare parts; includes unscrambler, pop up cut off saw & waste conveyor; also includes extensive electrical wiring; disconnects; and boxes; one 8' powered stacking table, numerous saw blades & assorted spacers; good condition- CLICK HERE FOR MORE PHOTOS

1311 Cornell 550 Double Arbor/Double Bay
rebuilt in 2000; 480 volt; sizer head 30 hp; 2 - 125hp motors; many gang spacers; some spare parts; in operation; includes blades and spacers

898 Jackson Gang/Bull Edger Double Bay

1217 1970 Klamath Ward Cut Off Gang Resaw Line
SOLD
For more pictures of this saw click here.

1380 1979 Pendu Cut Up Sytem
upgraded in 1992; double arbor gang saw electric model 4000; 575 or 440 volt transformer included; 75 hp motors; in line sizer; Pendu 2400 cut off saw; Pendu Pit unscrambler with 4 stops; push button console; conveyro with scrap hopper; some spare parts

S C R A G G M I L L S

1461 1993 Pendu Scragg
2 head; 480 volt; 50hp motors; length capacity 30"-72"; comes with infeed deck; instorage

S A W M I L L E Q U I P M E N T

1215 1988 Corley 3 Saw Edger
2 moveable blades; 1 stationary; 6" x 36"; split infeed rolls; powered outfeed; laser lights; motors; starters

1370 1995 Miner Gang Saw Edger
6x36; less than one year of run time; infeed; outfeed; 75hp motors; spare saws

M I S C E L L A N E O U S E Q U I P M E N T

1356 Approx. 1986 Stetson Ripper
25hp spindle motor; 230 volt; 3 phase